Catalogue


Mine fan with electric drive VME2-10-160 NEW!

The VME2-10-160 local ventilation mine fan with explosion-proof electric drive is intended for ventilation of blind workings in ore mines with section of 16-25 m2 at air density of up to 1.3 kg/m3, temperature from 268 to 308 K, dust content of air of up to 50 mg/m3, and relevant humidity of up to 95% (at 298 К). Climatic conditions of Y-type, allocation category No.5 in compliance with GOST 15150-69 allow the fan to be used as main ventilation fan.

The fans are allowed to be used as main ventilation fans. The fan is installed vertically with a permissible deviation of axle from horizontal by not more than 30 degrees. The fan is suitable for air pipes with diameter 1000-2000 mm.

Advantages:

  • fans provide stable long-term 24-hour ventilation
  • hi-tech aerodynamic scheme with high pressure characteristic
  • thermal shutdown in case temperature exceeds normal value or the bearings start to vibrate
  • blades of the fan are made of non-inflammable material
  • economic

Specifications:

 

Name
Value
Nominal diameter, mm
1000
Rated capacity, m3/s
23
Max. deviation, %
minus 10
Total rated pressure, Pa
6350
Max. deviation, %
minus 10
Maximum overall efficiency
0.86
Max. deviation
minus 0.03
Electric drive power, kW
160
Motor type
3VRM280M4 (2VRM280L4)
Voltage, V
380/660, 660/1140
Rotation speed, 1/min
1500
Motor explosion protection level
PB Exdl (PB 3B)
Motor protection level
IP54
Height, mm, max
1450
Width, mm, max
1200
Set mass, kg, max
1900
Mid life before the first overhaul, hours, minimum
10000

Notes:
  1. Parameters specified in the table are given for density 1.2 kg/m3.
  2. Max. deviation of the figures, stipulated in lines 2, 3, 4 of the table are not limited.

Trade mark

Sanitary and epidemiological certificate

 

To close a window