Shoe brakes are applied in mining, metallurgy and other branches of industry. They are designed for hold-up and stoppage of shaft mechanisms (mainly of material handling machines) in a braked state with non-operating drive. The brakes are mounted vertically (with horizontal pulley axle) on mechanisms designed for operation in fire risk and explosive conditions. When mounted on the outdoor usage mechanisms the brakes shall be covered with housing to prevent from precipitation and the effects of sun radiation. TKG-type shoe brakes consist of a mechanical part and a drive (electrohydraulic drive).Specifications:
|
Name
|
TKG-200RV
|
|
Breaking torque, N*m |
300
|
|
Brake pulley diameter, mm |
200
|
|
Pusher type |
TE-300RV
|
|
Rated voltage, V* |
380
|
|
Power consumption, W |
160
|
|
Frequency, Hz |
50
|
|
Average force at pusher rod, N |
300
|
|
Rod stroke, mm |
32
|
*Upon the request it’s possible to produce pushers for 127, 660 and 1140 V.
)){kind=link}
Trade mark
License issued by Federal Office of Ecological, Technological and Atomic control
