Catalogue


Shoe brake ТКG-160

Shoe brakes are applied in mining, metallurgy and other branches of industry. They are designed for hold-up and stoppage of shaft mechanisms (mainly of material handling machines) in a braked state with non-operating drive. The brakes are mounted vertically (with horizontal pulley axle) on mechanisms designed for operation in fire risk and explosive conditions.
When mounted on the outdoor usage mechanisms the brakes shall be covered with housing to prevent from precipitation and the effects of sun radiation.
TKG-type shoe brakes consist of a mechanical part and a drive (electrohydraulic drive).

Shoe brakes shall be used in the following conditions:
  • ambient temperature from –40 to +40˚C;
  • relevant humidity 80% at 20˚C;
  • environment should not contain gases or vapour destructive to metal and rubber.
The brakes have a wide range of braking moments great by different size-types of pushers mantled on them.

Specifications:

Name
TKG-160

Breaking torque, N*m

100

Brake pulley diameter, mm

160

Pusher type

TE-30

Rated voltage, V

380

Power consumption, W

160

Rod stroke, mm

32
Size, mm
536*415*213

Weight, kg

25

The product is certified in GOST R system.

Trade marks

    

 License issued by Federal Office of Ecological, Technological and Atomic control


To close a window